Pipe Bursting Equipment
Please contact us:
360--828-5732
800-620-4773
Please click on the links below for other RJM web pages:
Pipe Bursting Equipment
Pipe bursting guide
Sewer Cameras
Pipe Locators
Pipe Bursting Equipment
-
Can convert to horizontal boring machine with optional bracket and rods.
-
Replaces any type of old pipe with any type of new pipe
-
Pipe bursting heads for 3/4" to 30" pipes.
-
Longer stroke length for faster bursting (30-ton stroke = 16", 40-ton stroke = 14").
-
Remove bellies.
-
Use your existing excavator hydraulic system to power the pipe bursting equipment or use our affordable portable hydraulic system.
-
Chain or cable pipe bursting machines. Easily switch to cable or chain by removing two pins and installing the other gripping head. Chain grips better, lasts about 20 times longer and can be used in sections. Cable can burst smaller pipes including water services and costs less initially.
-
Supported by over 15 years of experience.
-
20 tons to 240 tons of pulling power.
-
No restoration in between pits.
-
40 second assembly time.
-
Only a 2' x 3' pit needed at pulling end.
-
Curved applications to 45 degrees.
-
Safer than horizontal boring since the new pipe goes into the same location as the old pipe.
-
Hollow cones allows sewer and drainage pipes to remain in service.
-
Low operating and maintenance costs.
-
Increase to larger pipes for increased capacity.
Manhole Trenchless Technology Accessory Equipment specially designed for deep-hole pipe bursting projects
The Manhole Accessory Pack allows you to work in deep, confined spaces with comfort and efficiency. No other system on the market gives you this level of versatility, capability and compatibility with all types of pipe materials including cast and ductile iron pipe.
RJM Company provides new and used lightweight Pipe Genie trenchless pipe bursting machines for restoration of sewer, water, gas and other underground pipes for sale.
What is pipe bursting?
Trenchless Pipe bursting machines split the existing pipe by pulling a pipe bursting head through the existing pipe, splitting the old pipe and pulling new pipe inside. At the pipe pulling machine end a 2' x 3' minimum pit is needed. At the other end, hole must be excavated large enough to feed the new pipe. Because the structures, streets, driveways, trees and other things in between the pits are undisturbed, project restoration costs are much lower.
Pipe Genie video summary: assembly, splitting copper, splitting steel, sizes, chain grip, power pack, 8.9MB, 1:40 min
Pipe bursting Instructional video
Step by Step Guide to Trenchless Pipe Bursting
Pipe bursting equipment instructions
Pipe bursting equipment converts to horizontal boring machine
15 years of experience in trenchless technology to support you. Pipe busting heads available for 3/4" to 30" pipes.
20 TON PIPE BURSTING AND PIPE REPLACEMENT SYSTEM COMPLETE 3/4" and 1' lines
Pulling Unit
Twin Cylinder Hydraulic Power
Hydraulic Connection Hoses
Hydraulic Actuator
100ft x 1/2”, Swage Quality Cable
1-1/2” Old Pipe, Cutter Cone
1-1/2” New Pipe, Puller Adapter
2 Shoring Blocks
Video & Instruction Manual
Total Shipping Weight 800 lbs
Power Pack
Cart Mounted
5.5hp Honda Gas Engine
Two Stage Hydraulic Pump
Hydraulic Fluid Reservoir
2500psi Operating Pressure
20 Ton Pipe Bursting System for 3/4" - 1" pipes with 5.5 Honda power pack: $14,995
20 Ton Pipe Bursting System for 3/4" -1" pipes without 5.5 Honda power pack: $12,995
Use your existing excavator hydraulics to power the pipe bursting pulling unit or 5hp Honda power pack.
Power Pack
Cart mounted, 5.5hp Honda gas engine, two stage hydraulic pump with
hydraulic fluid reservoir, 2500psi operating pressure: $2,495
30 TON PIPE BURSTING AND PIPE REPLACEMENT SYSTEM
Complete for 4" pipesPulling Unit
Twin Cylinder Hydraulic Power
Hydraulic Connection Hoses
Hydraulic Actuator
100ft x 3/4”, Swage Quality Cable
4” Old Pipe, Cutter Cone
4” New Pipe, Puller Adapter
2 Shoring Blocks
Video & Instruction Manual
Total Shipping Weight 1200 lbs
30 Ton Pipe Bursting System for 4" pipes with 5.5 Honda power pack: $19,995
30 Ton Pipe Bursting System for 4" pipes without 5.5 Honda power pack: $17,995
30 Ton Pipe Bursting System for 4" and 6" pipes without 5.5 Honda power pack: $20,995
Use your existing excavator hydraulics to power the pipe bursting pulling unit or 5hp Honda power pack.
Power Pack
Cart mounted, 5.5hp Honda gas engine, two stage hydraulic pump with
hydraulic fluid reservoir, 2500psi operating pressure: $2,495
40 TON PIPE BURSTING AND PIPE REPLACEMENT SYSTEM
Pulling Unit
Hydraulic Connection Hoses
Hydraulic Actuator
100ft Pulling Chain
4” & 6” Old Pipe, Cutter Cones
4” & 6” New Pipe, Puller Adapters
2 Shoring Blocks
Video & Instruction Manual
Total Shipping Weight 1600 lbs
Power Pack
Cart Mounted
9.0hp Honda Gas Engine
Two Stage Hydraulic Pump
Hydraulic Fluid Reservoir
2500psi Operating Pressure
9 HP Honda Twin Cylinder Hydraulic Power Pack
40 Ton Pipe Bursting System with chain for 4" and 6" pipes including 9 Hp power pack: $24,995
40 Ton Pipe Bursting System with chain for 4", 6" and 8" pipes including 9 Hp power pack: $28,995
40 ton system above without 9 HP power pack: $21,995
60 ton PE Chain System Capable of Pipe Bursting
3/4" to 12" pipes: complete with: 100 ft. of ¾” pulling-chain & cart, 100 ft. of ¼” pulling-cable, 8” PE cones, 8” PE adaptors, hydraulic hose & actuator, 20 hp. Honda power-pack, pin punch, ¾” chain block, three ¾” chain couplings, 2 shoring blocks, 20” of ¾” chain: $49,900.00 US
80 ton PE Chain System Capable of Pipe Bursting
3/4" to 16" pipes: complete with: 100 ft. of 1” pulling-chain & cart, 100 ft. of ¼” pulling-cable, 12”, 14” & 16” PE cones, 12”, 14” & 16” PE adaptors, hydraulic hose & actuator, 20 hp Honda power-pack, pin punch, 1” chain block, three 1” chain couplings, 2 shoring blocks, 20” of 1” chain: $85,000.
Please
call for other pipe sizes, questions.
Hydraulic
Power Pack: cart mounted, 9.0hp Honda
twin cylinder gas engine, two stage hydraulic pump, hydraulic fluid
reservoir, 2500psi, operating pressure: $3,495
Irrigating
6" cutting head with 5/8" chain ends: $1195
Irrigating 8" cutting head with 3/4" chain ends: $1595
Irrigating 12" cutting head with 3/4" chain ends: $2995
Used to remove bellies.
Fusion
Machine
RAM 14 1" IPS - 4" DIPS: (32 mm - 160 mm)
$2895
Inserts needed for each pipe size.
Heat Fusion Poly Pipe Welding Tools
Poly Pipe Fusion Welding video, 812 Kb, 19 sec
$4995
Horizontal
boring conversion