• Low pressure system operates from backhoe or hydraulic power pack

• 12-inch stroke length

• 60,000 lbs. of pulling force

• Compact design, 20" L x 20" W x 29" H

• Up to 10 feet per minute pipe bursting speed. 

• 2" to 6" pipe bursting capacity

• Pipe bursting head bursts with 0, 1, 3 blades to match splitting needs best.

• Steerable horizontal boring

• Up to 4" pipes

• 37,700 lbs. force

• Bellies can remain a problem if pipe bursting, bore in a new pipe in at any grade needed without the previous belly.

• If the existing pipe is collapsed or obstructions block feeding a cable through to burst the pipe, then push the rods through or bore in a new pipe.

• Pipe burst cast iron, concrete, HDPE, Asbestos cement, PVC, ductile iron, Orangeburg and clay pipes and others. 

• No extra space needed before the connection to steer the bore

• Powered by standard excavator hydraulic systems or use our portable hydraulic power pack units.

• Easily dis-assembles into smaller and lighter pieces for easy transportation and storage.

• 50 years experience building trenchless equipment

• Tough design and construction

• No restoration in between pits

• Safer than horizontal boring since the new pipe goes into the same location as the old pipe.

• Increase pipe size

• Steel rods are more durable than cable strands

• Doesn't reduce pipe diameter like pipe lining.

• Low operating and maintenance costs

• Up to 12" pipes (can be used with multiple PD-7's for larger pipes)

• Pipe bursting with rods

• 112,000 lbs. of force

• 5 feet per minute, 12" stroke length

• 72" x 22" machine dimensions

• Up to 8-inch pipe

• Steerable horizontal boring

• 84,822 lbs. of force

• 14,000 lbs. of pulling force to pipe burst

• 3/4" - 2" in most compressible soils

• 12" stroke bursts at 6 feet per minute

• Weight: 145 lbs., 18" long x 14" wide x 25" high

• 20 hp electric start Honda engine

• 20 gpm, 3000 psi

• Control panel with throttle, choke, start, run/bypass, on/off, pressure gauge

• Pressure compensating pump

• 10 micron hydraulic filter

• 10 gallon frame reservoir protect pump and cools fluid

• Weight:  415 lbs., 28" high x 45" long x 20.25" wide

Trenchless pipe boring machine for replacing water size pipes up to 2-inches from a basement.

• 20 hp Honda electric start engine, 3000 psi, 20 gpm

• Control panel with throttle, choke, start, run/bypass, on/off

• Portable cart style

• 6.5 gallon fuel tank

• Pressure compensating pump

• 10 gallon hydraulic reservoir, 10 micron filter

• Hydraulic oil cooler

• Pressure gauge

• Fold down handles for easy storage

• Weight:  430 lbs., 36" high x 40" long x 30" wide

• 5.5 hp Honda or 7 hp Kohler engine

• 2350 psi, 5 gpm

• Pressure bypass for easy starting

• Weight: 140 lbs. wet, 19" high x 22" long x 16" wide