HDPE plastic pipe fusion machines: 8 - 18 inches, 200 mm - 500 mm pipes by Ritmo from RJM.
This is a self-aligning machine, suitable for plastic pipe fusion for water, gas and other fluids under pressure, up to Ø 18" IPS 500 mm. Ritmo Delta 500 welds fittings without the need for any additional equipment: elbows, tees, wyes and stub-end can be welded by simply taking the fourth clamp off the machine body's frame. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
Options:
Plastic Pipe Fusion brochure
Pipe sizes | 8" IPS - 18" IPS 200mm - 500mm |
Machine Body Weight | 507 lbs. (230 kg) |
Power Supply | 230 VAC or 400 VAC, 50hz or 60 Hz |
Maximum Power | 79500 watts |
Working Temperature | 360F - 560F, 180 - 280 C |
Outside temperature range | -23F -104F, -5 C to +40 C |
Time to reach welding temperature | Less than 35 min |
Chassis Dimensions | 61" W x 40" D x 39" H 1265mm W 790mm D 780mm H |
Pipe materials | HDPE, PP, PVDF |
Warranty | Two years |
RJM Water and Sewer Equipment Catalog