Cable Fault Locators


Cable Fault Locators TDR 800-620-4773 360-828-5732 Please click on the links below for other RJM web pages: Home Locators: Utility locators Cable locators: RD8000 Underground cable locator: RD7000 Pipe locators: RD5000 Cable locators: RD2000 Cable locator: CAT3 Ground penetrating radar Locator sondes Cable fault locators Metal detectors Plastic pipe locators Used utility locators Utility locator training Conduit Inspection Cameras Site Map		Home > Locators > Cable Fault Locators Cable Fault Locators Radiodetection / Riserbond The Cable Fault Finder Accessory A-Frame is easily connected to RD8000 PDL, RD7000 PL, RD7000 TL underground cable locator receivers converting it to a ground cable fault-finder including secondary power cables. Arrows on the locator receiver's LCD easily guide the operator to cable fault when the transmitter is connected to a faulted cable. Arrows point towards the fault from anywhere within range Easy-to-use The utility locator receiver automatically recognizes the A-frame when it's connected and changes to the correct frequency. Single or two hand operation Display shows the fault signal strength allowing determination of the degree of the fault and whether there may be other faults on the same cable. Locates cable sheath-to-ground faults on direct buried power and other cables When near the fault, the forward or backward arrows point towards the fault where ever you place the A-frame. The signal strength number shows the strength of the fault to determine if there is another fault on the cable and which fault is the major fault. Some cable faults can be located with just the cable locator receiver and transmitter by locating where the signal changes or rapidly stops..
		TDR - Metallic Time Domain Reflectometer Model 1550 features: Multiple ranges, large backlit LCD, adjustable instrument settings and fingertip operation. Metallic Time Domain Reflectometer Cable Fault Locator Model 1550 is a low cost TDR designed for rugged, outside plant applications. A truly one-handed, ergonomic design provides the operator with an easy to use yet versatile TDR, Cable Fault Locator. The unique modular test lead design provides quick and easy adaptation to a variety of industries and applications. The custom waterproof housing and easy access battery compartment make the Riser Bond 1550 the perfect troubleshooting tool for anytime, anywhere, and any weather application. Locates: opens, shorts, taps, splices, water corrosion and many other cable faults and conditions. 7-2000 nanosecond pulse width The small size and low cost make the Model 1550 an ideal tool for all technicians, linemen, and construction personnel.

Riser Bond Model 1270A

1270a TDR

Dual pair input - Allows compison to a good pair with a faulted pair for more accurate and easier troubleshooting.

Intermittent Fault Detection - Monitor cables with difficult to catch intermittent faults even while not attended.

Sub-nanosecond pulse width for high sensitivity fault location of minor faults: <1 coax, 2, 25, 100, 500, 1000, 6000 nanoseconds. Range up to 63,700 feet.

Dual Independant Cursors - Measure between any two points in range

Tough watertight case

Noise filters

Automatic and manual cursor control

Live power warning

Cable Fault Radar Riser Bond 1270A brochure

Riser Bond Model 1205CXA TDR

Time Domain Reflectometer Cable Fault Locator for coaxial cables.

Find small faults that plague high bandwidth systems or cause digital signal interruption.

Noise filters for eliminating unwanted waveform noise.
Unique dual independent cursors.
Automatic and manual cursor placement functions.
Powered cable warning.
Rugged, weatherproof packaging.
Compact, lightweight, portable.
Intermittent Fault Detection (IFD) mode monitors and locates hard-to-find intermittent faults.

3300 Cable Radar

Intermittent Fault Detection

5, 25, 100, 500, 1000 nanosecond pulse width

1270 TDR Riserbond Model Fault Locator

1205CXA Time Domain Reflectometer - TDR

Intermittent Fault Detection

6000 Metallic Time Domain Reflectometer

Dual pair input

Intermittent Fault Detection

1270a TDR

Dual pair input

Intermittent Fault Detection

Pulse width: <1 coax, 2, 25, 100, 500, 1000, 6000 nanoseconds

Pipeline Current Mapper (PCM)

Radiodetection's Pipeline Current Mapper (PCM) overcomes the limitations of the existing techniques used for evaluating cathodic protection system effectiveness. The PCM easily identifies and locates shorts and also determines areas of coating defects.

The system eliminates the need to perform "current spans" and manual calculations and works without connection to the pipeline. Data logging, onsite review of readings, and uploading to a PC or Laptop with graph printing is also featured.

Easily identifies and locates shorts
Determines areas where there are pipeline coating defects.
Works in areas where there is metallic contact with other structures
Measures and displays current magnitude without connection to the pipeline
PCM receiver technical specification
PCM transmitter technical specification

RJM Company

Representatives for Radiodetection cable and pipe locators in all of Oregon, Washington, Idaho, Montana, Utah and Wyoming.

Portland Area Office

Brian Moss

800-620-4773

brianmoss@rjmcompany.com

Office: 360-828-5732

Cell: 360-903-0558

Fax: 208-988-6447

9808 NE 134th Ave

Vancouver WA 98682

Tacoma Area Office

Gary Moss

253-841-4950

RJM cable fault locators, cable radar TDR

Cable and Pipe Locators

Cable Fault Locators TDR

Home