Cable and Line Locators

	Displays cable or pipe direction
	Remotely controls the transmitter from 1/3 mile for quick selection of optimal frequency and output levels
	Displays peak and null signals simultaneously for faster accuracy check
	28% lighter than RD4000

RD8000 Cable and Line Locator Brochure

Null Distance Arrows: Left and right arrows grow longer the farther from the underground pipe or cable and a variable tone that is different on side. Display of peak and null at the same time make verifying locate accuracy faster and easier.

Cable and Pipe Direction Display: The RD8000 displays a line parallel to the t pipe or cable for easier and faster locating especially at bends.

Centros™
• Over 50 software and hardware patents
• High-performance processor core runs new, innovative algorithms.
• Improves the accuracy and repeatability of measurements
• Powerful signal filtering and analysis even in the most electrically noisy environments.

ILOC™: The Radiodetection RD8000 cable and line locator remotely controls the frequency and output level of the Tx-3B or Tx-10B locator transmitters with advanced Bluetooth® link from 1/3 mile. Integrates easily with GPS for quick data collection to update utility maps.

SurveyCERT™: Store and review up to 1000 locate records that can include GPS data for quick GIS updates to correct or create utility maps.

eCAL™: Validate the original factory calibration of the RD8000 and RD7000 underground pipe and cable locators and print certificates without returning it.

TruDepth™: Automatically displays accurate depth readings within 2.5% of depth when correctly oriented and directly above the pipe or cable preventing errors.

Dynamic Overload Protection: Filters out unwanted cable locator signals in extreme conditions such as substations.

StrikeAlert: Warns of nearby power cables.

Passive Avoidance: Simultaneous power and radio signal detection on underground pipes and cables with real audio to differentiate the relative proportions or each signal.

Light weight and well balanced – 28% lighter than industry standard RD4000 cable and line locator. (If you place your finger in center of the handle, the RD7000 and RD8000 pipe and cable locators balance vertically which promotes more accurate locating and the comfort of locator operator.

Improved Display: Large, high contrast, automatic backlit LCD screen on both the transmitters and receivers.

Fault Find: Patented technique with arrows that point towards the ground fault from anywhere near the fault.

Current Direction: Simple patented identification tool with arrows that point forward when near the target utility and backwards when near all others utilities.

Single Peak Antenna mode for greater sensitivity.

Choice of batteries: Powered by two NiMh rechargeable or alkaline D-cell batteries with a life of 30 hours.

Peak and Null Antennas for locate accuracy verification.

USB Port: Upgrade your RD8000 or RD7000 underground cable and pipe locator without sending it in.

Withstands Water spray all directions and dust - (IP54) you can operate it in nearly any environment.

The RD7000 and RD8000 utility locators include English, Turkish, Italian, Swedish, Portuguese, Spanish, Slo, CZ, Polish, NL, German, French language.

RD8000 Cable and Line Locator Brochure

Radiodetection Utility Locator Summary

Cable and Line Locator / Pipe Locator RD8000 users guide

RD8000 Cable and Line Locator Manual

Cable and Pipeline locator in hardcase photo in hardcase

RD8000 / RD7000 hardcase photo

Cable pipe utility locator RD8000 RD7000 soft case photo

Radiodetection RD8000 and RD7000 Utility Locator Summary

All RD7000’s and RD8000’s: Three year warranty, 28% lighter than RD4000, well balanced, withstands water spray, improved display, faster response, better noise filtering, onsite calibration verification, prevents depth errors, arrows show direction and distance, shallow power cable warning, onsite upgrades, two rechargeable / alkaline D-cells, Power frequency, Radio frequency

RD7000 SL: All features above plus 8 KHz, 33 KHz, 65 KHz, 83 KHz

RD7000 DL: Null antenna mode, 512 Hz line, 512 Hz sonde, 8 KHz sonde/line, 33 KHz sonde/line.

RD7000 PL: Null antenna mode, depth on power, Dynamic overload protection, 512 Hz, 8 KHz, 33 KHz, 65 KHz, 33 kHz, Cable fault location

RD7000 TL: 512 sonde, 8Khz, 33 KHz, 65 KHz line, 131 KHz line, 200 KHz line, cable fault location

RD8000 PXL and PDL: All features of RD7000’s plus displays direction of utility, store and review up to 1000 locate records, filters out extreme noises, single peak antenna for greater sensitivity, null antenna for accuracy verification. 512hz, 8 KHz, 33 KHz, 65 KHz, 83 KHz, 131 KHz, 200 KHz, power, radio,

RD8000 PDL: All the features or the RD8000PXL plus: Simultaneous power and radio, Cable fault location, Current Direction, depth in power, CATV, CPS, 98 Hz, 128 Hz, 460 Hz, 570 Hz, 577 Hz, 740 Hz, 870 Hz, 970 Hz, 9.8 KHz, CD 256 Hz, CD 285 Hz, CD 320 Hz, CD 380 Hz

Bluetooth remote control of Tx-3B or Tx-10B frequency and output from RD8000 receivers. (optional)

Transmitters: 15 direct frequencies from 200hz to 200 Khz, 8 induction frequencies, LCD display, customizable menu, 10 output levels, multi-meter, accessory storage in base, withstands water spray from all directions, alkaline or rechargeable “D-cells”

Tx-1: 1 watt max. output.

Tx-3: adds 3 watt max output, cable fault location and stronger induction.

Tx-10 adds 10 watt max output, cable fault location, current direction and stronger induction.

pipe-locator-Radiodetection-RD7000-softcase

cable-and-pipeline-locator-hardcase-RD8000

Soft case Hard case New hard case Custom hard case

RD7000 utility pipe locator is physically the same as the RD8000 but with a better price and fewer features.

Representatives for Radiodetection cable and pipe locators in all of Oregon, Washington, Idaho, Montana, Utah and Wyoming. For other areas please contact Radiodetection at 877-247-3797 x 181 to find the dealer near you.

	Tx-1 1 watt, lowest price
	Tx-3: 3 watts, and fault find.
	Tx-10: 10 watts, fault find, current direction
	Bluetooth remote control optional on Tx-3 and Tx-10

	SideStepAuto analyses and selects the optimum frequency based on ground impedance improving locate accuracy and extending battery life
	Removable accessory tray
	Fault find up to 2 M ohms
	Current Direction fault find for long distance and identify cables
	30V or 90V output for high impedance situations
	Group frequency selection by locator receiver model
	15 direct frequencies, 8 inductive frequencies, 4 current direction frequencies
	Short circuit protection
	Large, high contrast, backlight LCD display with clear information
	High ground impedance alarm.
	10% lighter than RD4000 T10
	Withstands water splashing from any direction and dust - (IP54) you can operate it in almost any environment
	Powered by 8 D cells (alkaline or NiMh), lithium ion battery pack available or vehicle cable
	Multi-meter measures voltage, current, impedance.
	Stores screw in ground rod, ground rod extension cable, direction connection cables, ground connection magnet in the transmitter base

	Induction clamps for cable locator
	Cable locator receiver antennas
	Live cable connector and live plug connector
	Cable fault locator A-frame
	Submersible underwater cable locator antenna

Cable and Line Locators

Cable and Line Locators

Sewer Cameras

Cable and Line Locator Radiodetection RD8000

Pipe and Cable Locator Transmitter Features

Three Utility Locator Transmitter Models

Cable and Line Locator Accessories:

Radiodetection RD8000 and RD7000 Utility Locator Summary