Water Leak CorrelatorSeCorr® 08Easy, affordable, and accurate water leak correlator |
|
Water Leak Correlator Integrated with Professional Acoustic Water Leak DetectorSeCorrPhonAll the advantages of both the correlator and the leak detector with a lower price and single case |
|
All Digital Water Noise CorrelatorSeCorr 300 PCImproved accuracy and distance especially in non-metallic water pipes. |
|
RJMPlease contact us: 360-828-5732 800-620-4773
Please click on the links below for other RJM web pages:
Water leak detector equipmentWater leak correlatorWater leak loggers
GPR - Ground Penetrating Radar
|
Water Leak Detection with Noise Correlation1, 2, 3 Easy!1. Place the magnetic microphones
on the hydrants and plug the microphones into the transmitters. The
transmitters automatically turn on and automatically set the proper
sensitivity levels. 2. Measure the distance between the hydrants and enter the pipe data (length, size, material). 3. Select "Start", wait about 30 seconds and correlator displays the distance from each microphone to the leak. Water leak noise correlation listens to water leak noises and calculates the distance to the leak. How it works:
|
|
Highly sensitive Piezo accelerometers
record noises in the frequency ranges of approx. 1 to 10,000
Hz. A range of adapters enables connection to a wide variety
of measuring points. |
||
Hydrophones directly pick
up the leak noise from the water, expanding the leak detecting range up to
1000 feet in all types of pipe. This
offers a considerable improvement of the location range,
especially with correlations on plastic pipes. |
||
| As soon as the microphones
receive the leak noise the signal is automatically amplified to the optimum level and
transmitted digitally to the SeCorr®
08. Both pieces of information are analyzed and processed by the SeCorr® 08. Utilizing 500mW transmitters signal transmission is clear and strong. Water leak correlator transmitter to receiver range of up to 2.5 miles, depending local conditions. Even if the radio transmitter is located within buildings or behind cars or trees correlation can be carried out successfully. |
||
Simple Standard software for less experienced operators or Professional version for all location demands. |
||
System case This robust plastic case offers space for all system components. The receiver and two transmitters can be charged simultaneously inside the closed case. |
||
|
Receiver SeCorr® 08
|
||
Water Leak Noise Correlator Integrated with Professional Acoustic Water Leak DetectorSeCorrPhon - SeCorr 08 and AquaphonAll the advantages of both with a lower price and single case |
The Sewerin Secorr 300 all digital water leak correlator locates some leaks that are so quiet that the can not even be heard with a leak detector directly on the pipe.
Digital Water Leak Noise Correlator microphone collects the sound signals and converts them to a digital signal in the microphone eliminating all other signal noises from the entire rest of the system including the microphone cables, transmitters, radio signal transmission, receiver and processing. The Sewerin SeCorr 300 Digital Water Leak Noise Correlator produces clearer results especially in plastic pipes where the signals are weaker. The digital leak correlator locates quieter and leaks at greater distances than analog or analog/digital water leak correlators.
The receiver connects to most computers via a USB port to correlate and display leak results.
Low
frequency microphones for plastic pipes and higher frequency microphones for
metallic are both integrated into the Sewerin microphones so only one set is
needed to purchase or use..
The RT300 transmitter mounts on a tripod for a transmission range of up to 1000 meters. If the radio transmitter's range is not enough for successful correlation, the noise is stored in the transmitter memory for 40 minutes of recordings, then transmitted when the radio connection is re-established.
The microphone holder allows the tripod and microphone to be carried in one piece to
the site and folds fit in the correlator case.
The user listens to the leak noise through high quality headphones, allowing control of the leak noise volume leak noise filter.
Bright stripes and LEDs identify each transmitter and add safety even at night.
The Radio Receiver
USB Connection and LED status lights
Rubberized magnetic antenna mount for quick set up
Rechargeable batteries last all day
Mounting clip holds RX300 from notebook strap
The software
All measurements at a glance
64-bit operating system compatible
Transmitter RT300
Up to five pipe sections
Three custom pipe materials in additional many predefined common pipe types.
Original noises can be recorded and compared
Easy drawing of damage sketches to supplement measurement reports.
Interference areas can be hidden.
Computer
System requirements
Pentium 4 processor with 1.2 GHz, minimum (1.8 GHz recommended)
Minimum 512 MB DDR, (recommended 1024 MB)
Windows 2000 SP4, XP32/64 SP2, Vista 32/64
Sound card, Graphics card
Minimum screen resolution: 1024 x 768 pixels
For Sewerin leak detection equipment in Oregon, Southern Washington, Southern Idaho please call: Brian Moss Office: 800-620-4773 or 360-828-5732 Cell: 360-903-0558 Fax: 208-988-6447 9808 NE 134th Av, Vancouver WA 98682 |
For Sewerin leak detection equipment in Northern Washington, Northern Idaho, Montana please call: Gary Moss Office: 253-841-4950 Cell: 253-732-8918 2217 23rd Street Place SE, Puyallup, WA 98372 |
For areas outside of Oregon, Washington, Idaho and Montana please find the Sewerin Dealer near you:
Sewerin Water Leak Detection Equipment - US Dealers Please contact us at the offices above for assistance with water leak detector equipment, locators, water leak loggers and water leak correlators.
Water leak location helium, Water Valve Operators, Water leak loggers, Water leak detector, Water leak correlator
